Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.

CHOOSING THE RIGHT EPOXY RESIN

When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.

HARTOL LUX hard-drying oil

Oil for kitchen countertops, tables, and other load-bearing interior surfaces.

Ecoat; 2x coating with intermediate sanding with 240

ECOAT for coatings from 0.2 to 3 mm 10 4.5 kg

ECOAT for coatings from 0.2 to 3 mm 10 + 4,5 kg

Clear epoxy resin for coatings from 0,2 - 3 mm.

Need additional information?

Tax rate

22 %

Price with VAT:

280,60 €

ADD TO CART

Clear epoxy resin for coatings from 0,2 - 3 mm.

Mixing ratio (by weight): 100 : 45

Pot life (160 g, at 20°C): cca. 20 min

Hardening time (at 20°C): 24 h

In order to destroy the air bubbles on the surface you can blow it with hot air by means of a common hair dryer or with a high quality gas burner.

DANGEROUS

H315 Causes skin irritation.

H319 Causes severe eye irritation.

H317 May cause an allergic skin reaction.

H411 Toxic to aquatic life with long lasting effects.

H314 Causes severe skin burns and eye damage.

H412 Harmful to aquatic life with long lasting effects.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P305 + P351 + P338 IN CASE OF CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P310 Immediately call the POISON CENTER/doctor/….

P261 Do not inhale dust/smoke/gas/mist/vapors/aerosols.

P273 Prevent release into the environment.

P333 + P313 If skin irritation occurs or rash appears: seek medical advice/attention.

Related products

FLEXA liquid flexible polymer foam 1000 g + 500 g

Liquid polymeric foam whichhardens into a flexible foam in a few minutes with an exothermic reaction.

Price with VAT:

24,71 €

STONIT mineral stone-like casting material 29,55 kg

STONIT is a high-quality inorganic casting material, suitable for the production of weather-resistant products similar to natural stone. It can be pigmented with inorganic alkali resistant pigments.

Price with VAT:

84,18 €

PLAST 34 Plastic dip coating material 1000 g

Price with VAT:

29,28 €

VACUSEAL WOOD wood stabilizing resin 5l

VACUSEAL WOOD Stabilizing Resin is a heat cured resin used for stabilizing and hardening wood and all other porous materials. Use KOLORO P dyes to color VACUSEAL.

Price with VAT:

118,95 €

MODELIT KRONOS fast casting polyurethane 1 kg + 1 kg

Two-component polyurethane which cures after 5-6 minutes into a very hard but tough material. Appropriate for manual or machine use.

Price with VAT:

26,84 €

ECOSTON ceramic casting powder 5 kg

Porcelain-like mass for casting into molds.

Price with VAT:

22,33 €

Izdelava spletne trgovine