Naziv vsebine
agent for solidifying loose gravel, sand, wood chips, bark, and similar decorative materials in bulk.
Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.
When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.
Oil for kitchen countertops, tables, and other load-bearing interior surfaces.
ECOSIL GEL 12 silicone rubber 500 g + 500 g
ECOSIL GEL is a fast-curing silicone rubber with a hardness of 20 Shore A. It is used for making soft molds and for producing orthopedic insoles. Due to its higher viscosity, it is suitable for application on vertical surfaces.
Tax rate
22 %
Price with VAT:
32,94 €
Pot life: 10 min
Demolding: 2 hours
Mixture colour
translucent
Pot life at 23˚C
7-10 minutes
Viscosity (mixture)
50.000 mPa.s
Hardness
20 Shore A
Mixing ratio A:B
1 : 1 (weight)
Tensile - shear strength
4.1 N/mm2
Curing time, demolding
2 hours
Elongation at break
380 %
Shrinkage
0.1 %
Related products
MODRIN is a general-purpose mold-making material suitable for casting resins, wax, gypsum, etc. MODRIN is preferred when undercuts are involved and a certain inherent stability of the mold is required.
Price with VAT:
119,56 €
MODRIN is a general-purpose mold-making material suitable for casting resins, wax, gypsum, etc. MODRIN is preferred when undercuts are involved and a certain inherent stability of the mold is required.
Price with VAT:
437,98 €
Silicone rubber used for lifecasting / bodycasting.
Price with VAT:
76,86 €
Elastosil M 4470 is used in the production of molds for casting materials with a melting point of 300 degrees C (e.g., lead and low-melting alloys). It cures with the addition of 3% catalyst T 40.
Price with VAT:
26,66 €
Extrem is a SILICONE RUBBER FOR MAKING THE MOST DEMANDING MOLDS
Price with VAT:
356,85 €
