Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.

CHOOSING THE RIGHT EPOXY RESIN

When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.

HARTOL LUX hard-drying oil

Oil for kitchen countertops, tables, and other load-bearing interior surfaces.

FASTICK LV low vicosity 20 g

Fastick Thin LV is watery-thin, instant adhesive is commonly used to repair cracks and hairline fractures because of its ability to easily penetrate narrow spaces.

Need additional information?

Tax rate

22 %

Price with VAT:

4,45 €

ADD TO CART

Fastick LV glue is well suited for strengthening porous, fragile material such as soft wood (balsa), ceramics, unpolished rocks and minerals, and fossil bones. During inlay applications such as turquoise inlays or metal powder inlays, the thin viscosity CA glue penetrates and stabilizes the powder through capillary action. Fastick glues are often used as a finish by applying several coats, sanding, and then polishing to a high gloss.

Use of Fastick Accelerator is advised when saturation of a porous object is unwanted. The instant cure will prevent Fastick LV from excessively soaking into the porous object, and prevent waste.

WARNING

H315 Causes skin irritation.

H319 Causes severe eye irritation.

H335 May cause irritation of the respiratory tract.

EUH 202 Cyanoacrylate. Dangerous. Bonds skin and eyes in seconds. Keep out of reach of children.

P101 If medical advice is needed, have product container or label at hand.

P102 Keep out of reach of children.

P103 Read the label before use.

P261 Do not inhale dust/smoke/gas/mist/vapors/aerosols.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

Related products

WOODY wood repair epoxy paste 50 g + 50 g

(WOODY 2K Holzergänzungspaste) Epoxy resin paste for manual application. Combines the stability of epoxy resins with the machinability of wood. Used for alteration or repair of existing tools and patterns (resin, wood, or metal).

Price with VAT:

8,42 €

ARES 33 acrylic emulsion 1 l

ARES 33 is a pure acrylic dispersion made using the latest emulsification technology. The particle sizes of the emulsion are significantly smaller than those of emulsions produced by traditional manufacturing methods. The dry film is hard, yet still tough and flexible, ensuring durability during the expansion and contraction of wood, stone, and mineral substrates. The film is UV resistant and does not yellow over the years. It is completely insoluble in water and resistant to hydrolysis. The dry film is completely transparent and non-tacky. It has good adhesion even on old alkyd binders.

Price with VAT:

11,96 €

PLEXTOL D 498 1 kg

Price with VAT:

19,52 €

CHEMSIL water-based - VS 1 l

Price with VAT:

12,20 €

FASTICK LV low viscosity 50 g

Price with VAT:

9,03 €

VEGICEL MC methylcellulose E461 100 g