Naziv vsebine
LAMEPOX 23 epoxy laminating resin 10 kg + 2,3 kg
LAMEPOX 23
High performance general purpose epoxy laminating resin for use in wet-lay or vacuum bagging glass fibre, Kevlar or carbon fibre lamination.
Lamepox 23 is specifically designed for simple use in resin/fiberglass composite construction.
It is exceptionally compatible in wood/fiberglass/epoxy composites.
Lamepox 23 is unfilled, has low viscosity, is odorless and cures at room temperature.
Mixing ratio: 100:23
Pot life: 130-140 minutes
For best mixing we recommend that Part A and Part B are thoroughly mixed in one container, and then put into a second container and mixed again with a new mixing stick or a clean paddle blade. This will ensure that no unmixed residue contaminates the final application mix.
Cured epoxy displays exceptional physical and performance properties. It can be sanded, shaped, machined, drilled, tapped and painted.
Lamepox 23 is also very convenient for impregnation of rotted wood.
Deep penetration of epoxy into rotted wood makes the wood hard and stable.
DANGEROUS
H315 Causes skin irritation.
H319 Causes severe eye irritation.
H317 May cause an allergic skin reaction.
H411 Toxic to aquatic life with long lasting effects.
H314 Causes severe skin burns and eye damage.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305 + P351 + P338 IN CASE OF CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call the POISON CENTER/doctor/….
P261 Do not inhale dust/smoke/gas/mist/vapors/aerosols.
P273 Prevent release into the environment.
P333 + P313 If skin irritation occurs or rash appears: seek medical advice/attention.
Related products
