TERANOL lacquer-oil for brick pavers and clinker 1l

TERANOL – HARD-DRYING OIL FOR BRICK PAVERS is a coating made from natural,
renewable plant raw materials. It does not contain biocides, so it can also be used in all living
spaces.

It is used for coating brick pavers, unglazed clinker, bricks, clay objects,
stone and other mineral surfaces.

Properties:
• non-slip
• excellent vapor permeability
• pleasant gloss

Technical data
Composition: linseed oil, tung oil, citrus oils, siccatives, natural resins.

Application: 2 coats on a clean and dry surface, in humid areas and outdoors at least 3 coats. It can be applied with
a brush, sponge, by dipping, or by pouring. After the first coat, wipe off the oil that the surface has not
absorbed after 10-15 minutes.

We recommend a primer coat with Teranol oil, diluted with ORANOL, up to 50%.

For better water resistance, a final coat with ANTIQUE WAX is recommended, which can be easily
renewed as needed.

Consumption: 1 l for 8 - 10 m2 in two coats (depending on the type, absorbency and quality of the surface, surface
treatment, and method of application)

Drying: 10 to 12 hours, next coat after 24 hours

Cleaning tools: with citrus oil, white spirit, turpentine, or lacquer thinner.

Work protection: the use of protective clothing and gloves is mandatory. The areas must be well ventilated.

Storage: in the original sealed packaging at a temperature below 30°C, out of reach of children