Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.
S 5000 RESIN FOR IMPREGNATION OF 3D PRINTS, STONE,... 1000 + 230 g
Resin S5000 is suitable for curing 3D prints, wood (furniture, bathtubs, sinks), fibers (glass, carbon, aramid) and all types of stones. The resin is also suitable for hardening prepared wood, cardboard, paper, and felt.
Resin S 5000 is suitable for curing 3D prints, wood (furniture, bathtubs, sinks), fibers (glass, carbon, aramid) and all types of stones. The resin is also suitable for hardening prepared stones.
Properties:
- the resin is very thin
- long open time (2 h+)
- excellent mechanical properties
Viscosity (mixture)
300 mPa.S
Mixing ratio A:B
100:23 (weight)
DANGEROUS
H315 Causes skin irritation.
H319 Causes severe eye irritation.
H317 May cause an allergic skin reaction.
H411 Toxic to aquatic life with long lasting effects.
P305 + P351 + P338 IN CASE OF CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call the POISON CENTER/doctor/….
P261 Do not inhale dust/smoke/gas/mist/vapors/aerosols.
P273 Prevent release into the environment.
P333 + P313 If skin irritation occurs or rash appears: seek medical advice/attention.
Plast 34 is a polymer mixture intended for rubberizing handles, wheels, pipes, tools, and similar items. It is characterized by elasticity, abrasion resistance, and toughness. It is resistant to most acids, alkalis, salts, and cleaners.
AQUARES is a food-contact approved ultra clear fast curing epoxy resin. This epoxy resin has added UV stabilizers and it is used for coating resin art, mosaics, photographs, tabletops and more. This epoxy resin has added UV stabilizers and it is used for coating resin art, mosaics, photographs, tabletops and more.
