Naziv vsebine
agent for solidifying loose gravel, sand, wood chips, bark, and similar decorative materials in bulk.
Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.
When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.
STONIT mineral stone-like modelling material 27,5 kg
It is a high-quality inorganic modelling /restoring mass, suitable for the production of weather-resistant products similar to natural stone.
Tax rate
22 %
Price with VAT:
79,30 €
STONIT MODELLING MATERIAL
STONIT MODELLING MATERIAL is a high-quality inorganic modelling mass, suitable for the production of weather-resistant products similar to natural stone. It can be pigmented with inorganic alkali resistant pigments.The dosage of the pigments is usually from 1-5 % to the weight of the binder.
We recommend the use of 1-2% of AR glassfibres (12 mm length) for reinforcement of thin-walled products.
ADVANTAGES
- High density
- Low sensitivity to dirt
- Fast curing
- High resistance at low temperatures
- High resistance to wear
Mix Components A and B for 3-5 minutes by hand or mixer.
Compressive strength at 20˚C after 1 day
55 N/mm2
Compressive strength at 20˚C after 28 days
over 100 N/mm2
Flexural strength at 20˚C after 28 days
approximately 15 N/mm2
Mixing ratio A:B
by weight 100:18
Related products
THERMOFORM is a polymeric modelling material that softens at 60 degrees C.
Price with VAT:
21,96 €
It is a high-quality inorganic modelling /restoring mass, suitable for the production of weather-resistant products similar to natural stone.
Price with VAT:
23,18 €
is finely ground gypsum of high whiteness and hardness, suitable for making stuccos, models, figures, and similar. It does not contain health-hazardous or caustic additives and is ecologically safe.
Price with VAT:
35,38 €
Oil clay is a type of clay that has had its water removed and oils added to prevent the clay from hardening in the air.
Oil clay remains perpetually pliable and is suitable for modeling under all conditions.
Its hardness or plasticity is not affected by temperature.
It does not contain any substances harmful to health or skin, so it can be handled without the use of gloves.
Price with VAT:
8,42 €
