Naziv vsebine
SOLARIS ANTIFRIZ blue, based on glycols and corrosion inhibitors, is suitable for use in cooling, heating and air conditioning systems, food freezing, solar collectors, heat pumps, biogas plants, and more.
agent for solidifying loose gravel, sand, wood chips, bark, and similar decorative materials in bulk.
When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.
Oil for kitchen countertops, tables, and other load-bearing interior surfaces.
STONIT mineral stone-like casting material 5,91 kg
STONIT is a high-quality inorganic casting material, suitable for the production of weather-resistant products similar to natural stone. It can be pigmented with inorganic alkali resistant pigments.
Tax rate
22 %
Price with VAT:
23,18 €
STONIT - MINERAL STONE-LIKE CASTING MATERIAL
STONIT casting
is a high-quality inorganic casting material, suitable for the production of weather-resistant products similar to natural stone. It can be pigmented with inorganic alkali resistant pigments.The dosage of the pigments is usually from 1-5 % to the weight of the binder.
We recommend the use of 1-2% of AR glassfibres (12 mm length) for reinforcement of thin-walled products.
ADVANTAGES
- High density
- Low sensitivity to dirt
- Fast curing
- High resistance at low temperatures
- High resistance to wear
Mixing ratio A:B ( by weight)
A (powder) 100 : B (liquid) 18
Compressive strength at 20˚C after 1 day
55 N/mm2
Compressive strength at 20˚C after 28 days
above 100 N/mm2
Flexural strength at 20˚C after 28 days
approx. 15 N/mm²
Colour
white
Related products
Fast curing two-component urethane, used for casting precise model parts, prototypes, tooling boards, casting in electronics; also used as an adhesive..
Price with VAT:
19,52 €
Kremenit is a skin safe ceramic powder which hardens into a porcelain-like material with the addition of water. It cures at room temperature, burning is not necessary.
Price with VAT:
7,08 €
Transparent, low viscosity casting epoxy resin.
Price with VAT:
416,07 €
A two-component polymer paste used as a reinforcing layer on EPS, XPS, (Styropor® Styrodur®), PU foams, wood, textile, metal, plastic (except PE, PP and PTFE).
Used for making car, aviation and boat prototypes, museum replicas, molds, special effects objects…
Price with VAT:
33,72 €
VACUSEAL WOOD Stabilizing Resin is a heat cured resin used for stabilizing and hardening wood and all other porous materials.Use KOLORO P dyes to color VACUSEAL.
Price with VAT:
27,74 €
Liquid polymeric foam that hardens into a very rigid foam in a few minutes with an exothermic reaction.
Price with VAT:
292,80 €
