Naziv vsebine
agent for solidifying loose gravel, sand, wood chips, bark, and similar decorative materials in bulk.
Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.
When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.
Oil for kitchen countertops, tables, and other load-bearing interior surfaces.
ALABASTER modeling plaster 25 kg
Modeling alabaster plaster is considerably harder than regular plasters. It is primarily used for making higher quality molds, stucco, and other decorative elements and figures.
Tax rate
22 %
Price with VAT:
39,04 €
ALABASTER MODELING PLASTER is finely ground plaster of high whiteness and hardness, suitable for making stuccos, models, figurines, and similar.
It does not contain health-hazardous or caustic additives and is ecologically safe.
Usage:
- slowly sprinkle the plaster into water
- after about 2 minutes, mix vigorously
- for modeling, mix 5-6 liters of water and 10 kg of powder
- for pouring, mix about 7 liters of water and 10 kg
Technical data:
Setting time start: > 12 minutes
Setting time end: < 40 minutes
The temperature during processing should be above + 5°C.
Use tools made of non-rusting iron or plastic. Clean tools immediately after use with water.
Related products
THERMOFORM is a polymeric modelling material that softens at 60 degrees C.
Price with VAT:
21,96 €
TERATON is an air-hardening modelling clay used for making sculputres, models, decorations, small decorative items...
Price with VAT:
4,88 €
TERATON is an air-hardening modelling clay used for making sculputres, models, decorations, small decorative items...
Price with VAT:
18,30 €
THERMOFORM is a polymeric modelling material that softens at 60 degrees C.
Price with VAT:
12,20 €
Modeling alabaster plaster is considerably harder than regular plasters. It is primarily used for making higher quality molds, stucco, and other decorative elements and figures.
Price with VAT:
23,18 €
Oil clay is a type of clay that has had its water removed and oils added to prevent the clay from hardening in the air.
Oil clay remains perpetually pliable and is suitable for modeling under all conditions.
Its hardness or plasticity is not affected by temperature.
It does not contain any substances harmful to health or skin, so it can be handled without the use of gloves.
Price with VAT:
8,42 €
