Naziv vsebine
agent for solidifying loose gravel, sand, wood chips, bark, and similar decorative materials in bulk.
Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.
When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.
Oil for kitchen countertops, tables, and other load-bearing interior surfaces.
BETOFORM silicone for concrete casting 1 kg + 100 g
Tax rate
22 %
Price with VAT:
31,72 €
Mixing ratio A:B
10:1 by weight
Pot life
90 min
Density at 23˚C
approximately 1.1 g/cm3
Tensile strength
approximately 6.50 N/mm2
Curing time, demolding
12 hours at 23°C
Linear shrinkage after 7 days at 23˚C
0.1 %
Elongation at break
700 %
Hardness (6 mm thick sample)
28 shore A
Related products
MODRIN is a general-purpose mold-making material suitable for casting resins, wax, gypsum, etc. MODRIN is preferred when undercuts are involved and a certain inherent stability of the mold is required.
Price with VAT:
119,56 €
Natural rubber latex for very flexible moulds. Used for casting wax, gypsum, resins...
Price with VAT:
15,98 €
Extremely soft, low-viscosity, high tear strength silicone gel.
Price with VAT:
35,38 €
Silicone rubber used for lifecasting / bodycasting.
Price with VAT:
76,86 €
Pourable, addition (platinum) curing, two-component silicone rubber that vulcanizes at room temperature
Very suitable for casting of all common reproduction materials, especially casting resins where absolutely accurate copies of models with pronounced undercuts.
Price with VAT:
39,77 €
