Naziv vsebine
agent for solidifying loose gravel, sand, wood chips, bark, and similar decorative materials in bulk.
Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.
When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.
Oil for kitchen countertops, tables, and other load-bearing interior surfaces.
Silicone rubber FX TRANSPARENT 1000 g + 100 g
Very accurate, extremely high tear strength translucent silicone used for prototype making, concrete casting...
Tax rate
22 %
Price with VAT:
45,14 €
Silicone rubber FX Translucent
Translucent silicone rubber used for:
- prototype making
- translucent castings
- high accuracy, high chemical resistance molds
- concrete casting molds
Properties
- high chemical and abrasion resistance
- extremely high tear strength
- low shrinkage
- dimensional stability
- temperature resistance up to 200°C
Recommended vacuuming due to high viscosity. Pot life and curing time are halved at 40°C.
Density
1.12 g/cm3
Mixing ratio A:B
10 : 1
Pot life
at 23˚C : 90 minutes
Tensile strength
6.5 ± 0.5 N/mm2
Tear strength
>22 N/mm
Hardness Shore A after 24 hours
43± 2
Elongation at break
400± 20 %
Curing time
at 23˚C : 15 hours
Related products
Crystalflex platinum is a transparent silicone rubber. It is used as a casting material in electronics (in case of repairs, it can be easily removed when cured), for casting various objects (e.g., exhibition, display, or museum exhibits). Crystal flex platinum is used in theater and film for effects of shattered glass or ice.
Price with VAT:
28,55 €
Silicone rubber for making molds for honeycombs and molds for soaps, candles.
Price with VAT:
25,62 €
High strength silicone rubber used for the most demanding molds.
Price with VAT:
71,98 €
Skin safe elastic molding material used for lifecasting / bodycasting. VIVAFORM stays elastic for 24 hours or 2-3 days in an air-tight plastic bag.
Price with VAT:
12,20 €
It is a two-component casting material for making elastic molds for casting objects from plaster, epoxy, polyurethane, methacrylate, and polyester resins, concrete, wax, and similar materials.
Price with VAT:
35,94 €
