Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.
- high elasticity and resistance to tear and abrasion
- temperature and chemical resistance, maximum short-term temperature 120°C
- easy to use
- solvent free
DANGEROUS
H332 Harmful to health if inhaled.
H314 Causes severe skin burns and eye damage.
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H317 May cause an allergic skin reaction.
H351 Suspected of causing cancer.
H335 May cause irritation of the respiratory tract.
H373 May cause damage to organs through prolonged or repeated exposure.
P305 + P351 + P338 IN CASE OF CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call the POISON CENTER/doctor/….
P303 + P361 + P353 IN CASE OF CONTACT WITH SKIN (or hair): Immediately remove all contaminated clothing. Rinse skin with water [or shower].
MODRIN is a general-purpose mold-making material suitable for casting resins, wax, gypsum, etc. MODRIN is preferred when undercuts are involved and a certain inherent stability of the mold is required.
ELASTOSIL® E43 TRANSPARENT is a self levelling, one-component acetoxy-cure silicone rubber which cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties, has good adhesion properties to many substrates. In particular used as adhesive on cured silicone rubber
CHOCOSIL (Chocosil) is a two-component silicone for making molds for chocolate, pralines, sugar products, marzipan, and other confectionery and bakery products.
It is a two-component casting material for making elastic molds for casting objects from plaster, epoxy, polyurethane, methacrylate, and polyester resins, concrete, wax, and similar materials.
