Naziv vsebine
agent for solidifying loose gravel, sand, wood chips, bark, and similar decorative materials in bulk.
Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.
When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.
MEGASIL mold making polymer 250 g + 250 g
MEGASIL is a fast curing silicone mold making putty used for making strong, long lasting molds. MEGASIL is easy to use.
Tax rate
22 %
Price with VAT:
22,00 €
MEGASIL is a fast curing silicone mold making putty used for making strong, long lasting molds. MEGASIL is easy to use. Mix equal parts of components A and B by hand (no scale needed). Used in restoration, jewelry making,...
MIXING RATIO: 1:1
POT LIFE (WORKING TIME): 3 min
HARDENING TIME (CURE TIME): 6-10 min
APPLICATIONS:
- restoration
- jewelry making
- restoring damaged wooden frames (paintings, mirrors,...)
- museum replicas
- ceramic molds
- making copies of leaves, stones....
- life casting
USE:
1. Prepare equal parts
of components A and B.
2. Mix intensively and quickly. (only 3 minutes for the total molding process).
3. Cover the model with the rubber by slowly driving the air out of the mold.
Related products
Extremely soft, low-viscosity, high tear strength silicone gel.
Price with VAT:
68,32 €
ELASTOSIL® E41 TRANSPARENT is a flowable, one-component silicone rubber with excellent mechanical properties, which cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties, has good adhesion properties to many substrates, in particular on cured silicone rubber
Price with VAT:
20,42 €
ECOSIL GEL is a fast-curing silicone rubber with a hardness of 20 Shore A. It is used for making soft molds and for producing orthopedic insoles. Due to its higher viscosity, it is suitable for application on vertical surfaces.
Price with VAT:
59,78 €
High strength PUR elastomer; Shore A hardness: 45 Pot life: 10 min Demoulding time: 2 hours
Price with VAT:
26,66 €
It is a two-component casting compound for making flexible molds for pouring objects from plaster, epoxy, polyurethane, methacrylate, and polyester resins, concrete, wax, and similar materials.
Price with VAT:
112,24 €
