SOLARIS ANTIFRIZ blue, based on glycols and corrosion inhibitors, is suitable for use in cooling, heating and air conditioning systems, food freezing, solar collectors, heat pumps, biogas plants, and more.

STABILIT AQUA

agent for solidifying loose gravel, sand, wood chips, bark, and similar decorative materials in bulk.

CHOOSING THE RIGHT EPOXY RESIN

When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.

HARTOL LUX hard-drying oil

Oil for kitchen countertops, tables, and other load-bearing interior surfaces.

ECOAT WHITE for coatings from 0.2 to 3 mm 1000 320 g

ECOAT WHITE for coatings from 0.2 to 3 mm 1000 + 320 g

White epoxy resin for coatings from 0.2 - 3 mm. Can be used as a Gelcoat.

Need additional information?

Tax rate

22 %

Price with VAT:

36,40 €

ADD TO CART

Clear epoxy resin for coatings from 0,2 - 3 mm.

Mixing ratio (by weight): 100 : 32

Pot life (160 g, at 20°C): cca. 20 min

Hardening time (at 20°C): 24 h

In order to destroy the air bubbles on the surface you can blow it with hot air by means of a common hair dryer or with a high quality gas burner.

DANGEROUS

H315 Causes skin irritation.

H319 Causes severe eye irritation.

H317 May cause an allergic skin reaction.

H411 Toxic to aquatic life with long lasting effects.

H314 Causes severe skin burns and eye damage.

H412 Harmful to aquatic life with long lasting effects.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P305 + P351 + P338 IN CASE OF CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P310 Immediately call the POISON CENTER/doctor/….

P261 Do not inhale dust/smoke/gas/mist/vapors/aerosols.

P273 Prevent release into the environment.

P333 + P313 If skin irritation occurs or rash appears: seek medical advice/attention.

Related products

FORTE for Quartz Binding Agent 1 l

Binding agent for water-resistant laminates and filling compounds with quartz

Price with VAT:

9,76 €

KREMENIT WHITE porcelain-like ceramic powder 25 kg

Kremenit is a skin safe ceramic powder which hardens into a porcelain-like material with the addition of water. It cures at room temperature, burning is not necessary.

Price with VAT:

87,84 €

EXPANDA polymer foam 5 kg + 5 kg

HARD POLYMER FOAM IN LIQUID STATE. EXPANDA is a two-component polymer material that hardens into a very hard surface foam within minutes through an exothermic reaction.

Price with VAT:

152,50 €

IZI light weight, rigid polymer foam 10 + 10 kg

Light weight liquid polymer foam which hardens into a rigid foam in a few minutes with an exothermic reaction.

Price with VAT:

292,80 €

ECOSTON ceramic casting powder 25 kg

Material similar to porcelain for casting in molds.

Price with VAT:

82,96 €

ECOAT WHITE for coatings from 0.2 to 3 mm 10 + 3,2 kg

White epoxy resin for coatings from 0.2 - 3 mm. Can be used as a Gelcoat.