Naziv vsebine
agent for solidifying loose gravel, sand, wood chips, bark, and similar decorative materials in bulk.
Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.
When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.
ECOSIL GEL 12 silicone rubber 5 kg + 5 kg
ECOSIL GEL is a fast-curing silicone rubber with a hardness of 20 Shore A. It is used for making soft molds and for producing orthopedic insoles. Due to its higher viscosity, it is suitable for application on vertical surfaces.
Tax rate
22 %
Price with VAT:
237,90 €
Pot life: 10 min
Demolding: 2 hours
Mixture colour
translucent
Pot life at 23˚C
7-10 minutes
Viscosity (mixture)
50.000 mPa.s
Hardness
20 Shore A
Mixing ratio A:B
1 : 1 (weight)
Tensile - shear strength
4.1 N/mm2
Curing time, demolding
2 hours
Elongation at break
380 %
Shrinkage
0.1 %
Related products
Chocosil is a food contact approved silicone rubber used for making chocolate, pralines, marzipan and other confectioners' and baking molds.
Price with VAT:
39,04 €
ELASTOSIL® E41 TRANSPARENT is a flowable, one-component silicone rubber with excellent mechanical properties, which cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties, has good adhesion properties to many substrates, in particular on cured silicone rubber
Price with VAT:
20,42 €
Extrem is a SILICONE RUBBER FOR MAKING THE MOST DEMANDING MOLDS
Price with VAT:
356,85 €
Pourable, addition (platinum) curing, two-component silicone rubber that vulcanizes at room temperature
Very suitable for casting of all common reproduction materials, especially casting resins where absolutely accurate copies of models with pronounced undercuts.
Price with VAT:
39,77 €
Thickener used for silicone rubbers Modrin MF and silicone rubber K-31
Price with VAT:
7,32 €
