Naziv vsebine
agent for solidifying loose gravel, sand, wood chips, bark, and similar decorative materials in bulk.
Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.
When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.
Oil for kitchen countertops, tables, and other load-bearing interior surfaces.
BETOFORM 5 kg + 500 g
Very durable and tough silicone, suitable for making concrete products (alkali resistant). It can be thickened into a dense paste with the addition of the additive TIXO (0.5 - 1%).
Tax rate
22 %
Price with VAT:
161,04 €
Pot life
90 min
Density at 23˚C
approximately 1.1 g/cm3
Mixing ratio A:B
10:1 by weight
Tensile strength
approximately 6.50 N/mm2
Curing time, demolding
12 hours at 23°C
Linear shrinkage after 7 days at 23˚C
0.1 %
Elongation at break
700 %
Hardness (6 mm thick sample)
28 shore A
Related products
Elastosil M 4470 is used in the production of molds for casting materials with a melting point up to 300 degrees C (e.g., lead and low melting alloys). It cures with the addition of 3% catalyst T 40.
Price with VAT:
40,69 €
ECOSIL GEL is a fast-curing silicone rubber with a hardness of 20 Shore A. It is used for making soft molds and for producing orthopedic insoles. Due to its higher viscosity, it is suitable for application on vertical surfaces.
Price with VAT:
32,94 €
Silicone Rubber Skin Liqui is used for making molds directly from the skin. Due to its more fluid consistency, it is also suitable for thinner applications.
Price with VAT:
34,16 €
Natural latex with additives. Used for making flexible molds from wax, gypsum, resin...
Price with VAT:
6,10 €
