Naziv vsebine
SOLARIS ANTIFRIZ blue, based on glycols and corrosion inhibitors, is suitable for use in cooling, heating and air conditioning systems, food freezing, solar collectors, heat pumps, biogas plants, and more.
agent for solidifying loose gravel, sand, wood chips, bark, and similar decorative materials in bulk.
When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.
Oil for kitchen countertops, tables, and other load-bearing interior surfaces.
Thixo silicone rubber thickener 30 g
Thickener used for silicone rubbers Modrin MF and silicone rubber K-31
Tax rate
22 %
Price with VAT:
21,96 €
Thixo thickener additionally thickens silicone rubbers Modrin MF and K-31 into a paste which can be used on vertical areas.
First add the catalyst into the silicone rubber and then add Tixo thickener. The mixture will thicken in 20-30 seconds. Recommended quantity is 0,5-1% by total weight. Adding TIXO thickener does not influence the silicone's curing time.
Related products
Extremely soft, low-viscosity, high tear strength silicone gel.
Price with VAT:
35,38 €
Chocosil is a food contact approved silicone rubber used for making chocolate, pralines, marzipan and other confectioners' and baking molds.
Price with VAT:
39,04 €
Elastosil M 4470 is used in the production of molds for casting materials with a melting point of 300 degrees C (e.g., lead and low-melting alloys). It cures with the addition of 3% catalyst T 40.
Price with VAT:
26,66 €
ECOSIL GEL is a fast-curing silicone rubber with a hardness of 20 Shore A. It is used for making soft molds and for producing orthopedic insoles. Due to its higher viscosity, it is suitable for application on vertical surfaces.
Price with VAT:
428,22 €
ECOSIL GEL is a fast-curing silicone rubber with a hardness of 20 Shore A. It is used for making soft molds and for producing orthopedic insoles. Due to its higher viscosity, it is suitable for application on vertical surfaces.
Price with VAT:
32,94 €
ECOSIL silicone rubber is suitable for making molds for small series of products and for creating less demanding molds without pronounced negative angles.
Price with VAT:
341,60 €
