SOLARIS ANTIFRIZ blue, based on glycols and corrosion inhibitors, is suitable for use in cooling, heating and air conditioning systems, food freezing, solar collectors, heat pumps, biogas plants, and more.

STABILIT AQUA

agent for solidifying loose gravel, sand, wood chips, bark, and similar decorative materials in bulk.

CHOOSING THE RIGHT EPOXY RESIN

When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.

HARTOL LUX hard-drying oil

Oil for kitchen countertops, tables, and other load-bearing interior surfaces.

ELASTOSIL M 4470 500 g + hardener T 40 40 g

Elastosil M 4470 is used in the production of molds for casting materials with a melting point of 300 degrees C (e.g., lead and low-melting alloys). It cures with the addition of 3% catalyst T 40.

Need additional information?

Tax rate

22 %

Price with VAT:

26,66 €

ADD TO CART

Elastosil M 4470 is used in the production of molds for casting materials with a melting point of 300 degrees C (e.g., lead and low-melting alloys). It cures with the addition of 3% catalyst T 40.

Start of curing at 20 degrees: 20 minutes

Curing time: 3 hours

Hardness: 60 Shore A

WARNING

H226 Flammable liquid and vapour.

H332 Harmful to health if inhaled.

H319 Causes severe eye irritation.

H373 May cause damage to organs through prolonged or repeated exposure.

H413 May cause long-lasting harmful effects to aquatic life.

P103 Read the label before use.

P241 Use [electrical equipment/ventilation equipment/lighting equipment/…] that is explosion-proof.

P260 Do not inhale dust/smoke/gas/mist/vapors/aerosols.

P303 + P361 + P353 IN CASE OF CONTACT WITH SKIN (or hair): Immediately remove all contaminated clothing. Rinse skin with water [or shower].

P305 + P351 + P338 IN CASE OF CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P501 Dispose of contents/container in accordance with regulations.

Related products

Thixo silicone rubber thickener 30 g

Thickener used for silicone rubbers Modrin MF and silicone rubber K-31

Price with VAT:

21,96 €

Silicone rubber FX TRANSPARENT 1000 g + 100 g

Very accurate, extremely high tear strength translucent silicone used for prototype making, concrete casting...

Price with VAT:

45,14 €

Food contact Silicone rubber CHOCO SIL 1000 g + 100 g

Chocosil is a food contact approved silicone rubber used for making chocolate, pralines, marzipan and other confectioners' and baking molds.

Price with VAT:

39,04 €

MEGASIL mold making polymer 1 kg + 1 kg

MEGASIL is a fast curing silicone mold making putty used for making strong, long lasting molds. MEGASIL is easy to use. Mix equal parts of components A and B by hand (no scale needed). Used in restoration, jewelry making,...

Price with VAT:

58,80 €

Silicone Rubber SKIN LIQUI 500 g + 500 g

Silicone Rubber Skin Liqui is used for making molds directly from the skin. Due to its more fluid consistency, it is also suitable for thinner applications.

Price with VAT:

34,16 €

GAUZE BANDAGE 3m x 10 cm 2 pieces

Price with VAT:

7,12 €

Izdelava spletne trgovine