Naziv vsebine
SOLARIS ANTIFRIZ blue, based on glycols and corrosion inhibitors, is suitable for use in cooling, heating and air conditioning systems, food freezing, solar collectors, heat pumps, biogas plants, and more.
agent for solidifying loose gravel, sand, wood chips, bark, and similar decorative materials in bulk.
When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.
Oil for kitchen countertops, tables, and other load-bearing interior surfaces.
Spray-on Silicone rubber QUICKSIL 750 g + 750 g
Fast curing spray-on silicone rubber.
Tax rate
22 %
Price with VAT:
47,58 €
QUICKSIL spray-on silicone rubber
Fast curing liquid silicone used for making complex molds. Suitable for spray-on application due to its short pot life and curing time.
Also used for making elastic reusable membranes for vacuuming and laminating.
Properties
- great chemical resistance to aggressive components in resins
- high mechanical hardness
- accurate reproduction
- dimensional stability
- fast curing
- simple to use
- clean work space
Density at 23˚C
1.1 g/cm3
Mixing ratio A:B
1:1
Pot life
at 23°C: 20 - 25 seconds
Tensile strength
> 15 N/mm
Colour comp. A
green-blue
Curing time, demolding
at 23˚C : 4-6 minutes
Colour comp. B
translucent
Hardness after 8 min
18 ± 2 Shore A
Elongation at break
350 ± 20 %
Hardness after 1 hour
22 ± 3 Shore A
Tear strength
3.8 N/mm²
Related products
Elastosil M 4470 is used in the production of molds for casting materials with a melting point up to 300 degrees C (e.g., lead and low melting alloys). It cures with the addition of 3% catalyst T 40.
Price with VAT:
40,69 €
Pourable, addition (platinum) curing, two-component silicone rubber that vulcanizes at room temperature
Very suitable for casting of all common reproduction materials, especially casting resins where absolutely accurate copies of models with pronounced undercuts.
Price with VAT:
40,14 €
Skin-friendly molding polymer for making molds.
Price with VAT:
35,38 €
