Naziv vsebine
SOLARIS ANTIFRIZ blue, based on glycols and corrosion inhibitors, is suitable for use in cooling, heating and air conditioning systems, food freezing, solar collectors, heat pumps, biogas plants, and more.
agent for solidifying loose gravel, sand, wood chips, bark, and similar decorative materials in bulk.
When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.
Oil for kitchen countertops, tables, and other load-bearing interior surfaces.
ECOSIL GEL 12 silicone rubber 10 kg + 10 kg
ECOSIL GEL is a fast-curing silicone rubber with a hardness of 20 Shore A. It is used for making soft molds and for producing orthopedic insoles. Due to its higher viscosity, it is suitable for application on vertical surfaces.
Tax rate
22 %
Price with VAT:
428,22 €
Pot life: 10 min
Demolding: 2 hours
Mixture colour
translucent
Pot life at 23˚C
7-10 minutes
Viscosity (mixture)
50.000 mPa.s
Hardness
20 Shore A
Mixing ratio A:B
1 : 1 (weight)
Tensile - shear strength
4.1 N/mm2
Curing time, demolding
2 hours
Elongation at break
380 %
Shrinkage
0.1 %
Related products
MODRIN is a general-purpose mold-making material suitable for casting resins, wax, gypsum, etc. MODRIN is preferred when undercuts are involved and a certain inherent stability of the mold is required.
Price with VAT:
119,56 €
Chocosil is a food contact approved silicone rubber used for making chocolate, pralines, marzipan and other confectioners' and baking molds.
Price with VAT:
39,04 €
ELASTOSIL® E41 TRANSPARENT is a flowable, one-component silicone rubber with excellent mechanical properties, which cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties, has good adhesion properties to many substrates, in particular on cured silicone rubber
Price with VAT:
20,42 €
ECOSIL GEL is a fast-curing silicone rubber with a hardness of 20 Shore A. It is used for making soft molds and for producing orthopedic insoles. Due to its higher viscosity, it is suitable for application on vertical surfaces.
Price with VAT:
237,90 €
It is a two-component casting mass, coating, or material for making elastic models for casting objects from gypsum, epoxy, polyurethane, methacrylate, and polyester resins, concrete, wax, and similar materials.
Price with VAT:
33,67 €
