Naziv vsebine

STABILIT AQUA
agent for solidifying loose gravel, sand, wood chips, bark, and similar decorative materials in bulk.
SAMSOPUR 1K-6 D4
Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.
CHOOSING THE RIGHT EPOXY RESIN
When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.
HARTOL LUX hard-drying oil
Oil for kitchen countertops, tables, and other load-bearing interior surfaces.
IZI 2 kg
IZI
IZI 2 kg
IZI

IZI light weight, rigid polymer foam 1 kg + 1 kg

Light weight liquid polymer foam which hardens into a rigid foam in a few minutes with an exothermic reaction.
Tax rate
22 %
Price with VAT:
35,38 €
ADD TO CART

IZI

IZI is a two-component light weight polymeric material that hardens into a rigid foam in a few minutes with an exothermic reaction. 

One kilogramme of liquid IZI produces approx. 14-16 litres of rigid foam with free foaming.

 

USE

- furniture parts 

- prototypes (industrial design, model making)

- pipes, reservoars  insulation

- casting figures (wood imitation)

- filler for unsinkable boats, ships

- mold making

- simple sandwich elements (containers, construction)

- sound and heat insulation

- scenography, theatre, film objects

- jewellery stands

 

PROPERTIES 

Density at free foaming - open mold: 70-100 g/l

Easily painted.

 

USE

 1/ Thoroughly mix each component in its original container.

2/ Weigh the appropriate amount and mix both components in a PP, PE, metal or glass container.

3/ Pour the mixture into a silicone rubber, metal or epoxy mold. Apply a release agent to a metal or epoxy mold.

 

WARNING: Component B is corrosive and a health hazard. Use protective goggles and gloves, ensure the work area is well ventilated.

Mixing ratio A:B
1:1
Pot life
100 seconds (at 22-25°C)
Dry to the touch
about 3 minutes
Reaction starts
40 seconds (at 22-25°C)

DANGEROUS

EUH 204 Contains isocyanates. May cause an allergic reaction.

H332 Harmful to health if inhaled.

H315 Causes skin irritation.

H319 Causes severe eye irritation.

H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.

H317 May cause an allergic skin reaction.

H351 Suspected of causing cancer.

H335 May cause irritation of the respiratory tract.

H373 May cause damage to organs through prolonged or repeated exposure.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P305 + P351 + P338 IN CASE OF CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P260 Do not inhale dust/smoke/gas/mist/vapors/aerosols.

P284 [In case of insufficient ventilation] wear respiratory protection equipment.

P405 Keep locked up.

P501 Dispose of contents/container in accordance with regulations.

Related products

    MODELIT STANDARD cold casting urethane resin 1 kg + 1 kg
    Fast curing two-component urethane, used for casting precise model parts, prototypes, tooling boards, casting in electronics; also used as an adhesive..
    Price with VAT:
    34,16 €
    EPOX 210 casting epoxy resin 1,5 kg
    Transparent, low viscosity casting epoxy resin.
    Price with VAT:
    27,25 €
    VIWOOD resin for wood/plastic composites  200 + 100 g
    High strength polymer resin for restoration/conservation of wood and for production of attractive wood-plastic composites.
    Price with VAT:
    14,35 €
    EPOFORM 100    10 kg + 5 kg
    A two-component polymer paste used as a reinforcing layer on EPS, XPS, (Styropor® Styrodur®), PU foams, wood, textile, metal, plastic (except PE, PP and PTFE). Used for making car, aviation and boat prototypes, museum replicas, molds, special effects objects…
    Price with VAT:
    243,90 €
    ECOSTON ceramic casting powder 5 kg
    Porcelain-like mass for casting into molds.
    Price with VAT:
    22,33 €
    BLACKWOOD 2.5 + 2.5 kg
    Black, fast-setting paste for cracks, bends, and other irregularities in wood. It is also used for filling cracks in other hard materials (ceramics - kintsugi technique, concrete, stone,...)
    Price with VAT:
    98,64 €
    Cookie - Analitics
    They are used to record the website's obscurity analysis and provide us with data to provide a better user experience.
    Cookie - social
    Cookies required for plug-ins for sharing content from social media sites.
    Cookie - chat
    Cookies allow you to sign up, contact and communicate through the communication plug-in on the page.
    Cookie - marketing
    They target targeted advertising based on past user's activity on other sites.
    What are cookies?
    By visiting and using the site, you consent to the use and recording of cookies.OK Learn more about cookies