RUSTIK - oil for brick pavers and clinker 5l

RUSTIK - OIL FOR BRICK PAVERS is a coating made from natural, plant-based renewable raw materials. It does not contain biocides, so it can also be used in all living spaces.

It is used for coating brick pavers, unglazed clinker, bricks, clay objects, stone, and other mineral surfaces.

Properties:
• pleasant to the touch
• calms the surface
• silky shine

Technical data

Composition: linseed oil, tung oil, citrus oils, siccatives.

Application: 2 coats on a clean and dry surface, in humid areas and outdoors at least 3 coats. It can be applied with a brush, sponge, by dipping, or pouring. After the first coat, wipe off the oil that the surface has not absorbed after 10-15 minutes.

We recommend a primer coat with Rustik oil, diluted with ORANOL, up to 50%.
 

For better water resistance, a final coat with ANTIQUE WAX is recommended, which can be easily renewed as needed.

Consumption: 1 l for 8 - 10 m2 in two coats (depending on the type, absorbency, and quality of the surface, surface treatment, and application method)

Drying: 10 to 12 hours, next coat after 24 hours

Cleaning tools: with citrus oil, white spirit, turpentine, or lacquer thinner

Work protection: the use of protective clothing and gloves is mandatory. The areas must be well ventilated.

Storage: in the original closed packaging at a temperature below 30°C, out of reach of children.