Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.
is a high-quality multi-purpose structural adhesive with high mechanical strength, suitable for bonding thermoplastics, metals, wood, and composite materials. It is characterized by excellent chemical and temperature resistance.
Samsofix mmacrylat 21/50 is used for bonding: ABS, PMMA and other acrylic polymers, aluminum, stainless steel, epoxy resins, wood, polycarbonate (PC), polyester, polyurethane, PPO, PVC, rim, hard PS, galvanized iron,… It does not bond untreated PE, PP OR PTFE (Teflon®).
THE CURED ADHESIVE LAYER IS RESISTANT TO MOISTURE AND WATER, GASOLINE, OILS, DILUTE ACIDS AND ALKALIS.
DANGEROUS
H225 Flammable liquid and vapors.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H335 May cause irritation of the respiratory tract.
H373 May cause damage to organs through prolonged or repeated exposure.
H315 Causes skin irritation.
P102 Keep out of reach of children.
P260 Do not inhale dust/smoke/gas/mist/vapors/aerosols.
P303 + P361 + P353 IN CASE OF CONTACT WITH SKIN (or hair): Immediately remove all contaminated clothing. Rinse skin with water [or shower].
P305 + P351 + P338 IN CASE OF CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501 Dispose of contents/container in accordance with regulations.
RES 33 is a pure acrylic dispersion, produced using the latest emulsification technology. The particle sizes of the emulsion are significantly smaller than those of emulsions made using traditional production methods. The dry film is hard, yet still tough and flexible, ensuring durability during the expansion and contraction of wood, stone, and mineral substrates. The film is UV resistant and does not yellow over the years. It is completely insoluble in water and resistant to hydrolysis. The dry film is completely transparent and non-sticky. It has good adhesion even on old alkyd binders.
Two-component epoxy-based adhesive in a cartridge for easy application. The adhesive starts to work after 5 minutes and reaches full strength after two hours. It bonds metal, glass, ceramics, wood, plastic, tiles, fiberglass, concrete, and stone. For even better adhesion, it can be reinforced with fiberglass.
