Naziv vsebine
agent for solidifying loose gravel, sand, wood chips, bark, and similar decorative materials in bulk.
Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.
When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.
Silicone gel SHORE 00 1 kg + 1 kg
Extremely soft, low-viscosity, high tear strength silicone gel.
Tax rate
22 %
Price with VAT:
68,32 €
SILICONE GEL SHORE 00
Silicone gel Shore 00 is extremely soft, has low viscosity and high tear strength. Can be coloured with pigments or pigment pastes.
Used for:
- fine-detailed mold making
- screen printing ceramics
- tampons for tampo print
- prototypes
- fishing baits
Mixing ratio A:B
1:1
Pot life
15-20 minutes
Mixing time
1 minute
Tensile strength
1.07 N/mm²
Resistance to crack forming
5 N/mm
Hardness Shore A after 24 hours
0
Curing time, demolding
90 minutes
Elongation at break
550 %
Related products
Thickener used for silicone rubbers Modrin MF and silicone rubber K-31
Price with VAT:
21,96 €
High strength silicone rubber used for the most demanding molds.
Price with VAT:
71,98 €
Elastosil M 4470 is used in the production of molds for casting materials with a melting point up to 300 degrees C (e.g., lead and low melting alloys). It cures with the addition of 3% catalyst T 40.
Price with VAT:
40,69 €
ECOSIL GEL is a fast-curing silicone rubber with a hardness of 20 Shore A. It is used for making soft molds and for producing orthopedic insoles. Due to its higher viscosity, it is suitable for application on vertical surfaces.
Price with VAT:
32,94 €
ECOSIL silicone rubber is suitable for making molds for small series of products and for creating less demanding molds without pronounced negative angles.
Price with VAT:
341,60 €
