Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.
(WOODY 2K Holzergänzungspaste) Epoxy resin paste for manual application. Combines the stability of epoxy resins with the machinability of wood. Used for alteration or repair of existing tools and patterns (resin, wood, or metal).
- Combines the stability of polymer resins with easy machinability of wood
- Exterior/Interior Use
- Waterproof
- Non-Solvent
- Permanent Repair
- No Shrink, No Crack, No Crumble
- Specific weight and appearance are similar to wood
- Curing at room temperature
- Binds the majority of structural materials
- Can be processed with the patternmakers’tools
- Can be coloured with inorganic and organic pigments
- Stainable
APPLICATIONS
- Restoration or repair of existing furniture, altars, wood or resin models
- Making of models and sculptures
- Binding woodwork
- Restoration of exterior wood damaged by exposure
Consistency
paste
Maximum layer thickness
30 mm
Mixing ratio A:B ( by weight)
100:100
Mixing ratio A:B ( by volume)
100:100
Curing time
24 hours
Colour comp. A
white/beige
Colour comp. B
light brown
Pot life at 25˚C (100 g)
40 min
Specific weight
0,95 g/cm³
DANGEROUS
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes severe eye irritation.
Sum of harmfulness for fertility. Sum of harmfulness for the unborn child.
H411 Toxic to aquatic life with long lasting effects.
P102 Keep out of reach of children.
P103 Read the label before use.
P303 + P361 + P353 IN CASE OF CONTACT WITH SKIN (or hair): Immediately remove all contaminated clothing. Rinse skin with water [or shower].
P305 + P351 + P338 IN CASE OF CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call the POISON CENTER/doctor/….
P501 Dispose of contents/container in accordance with regulations.
RES 33 is a pure acrylic dispersion, produced using the latest emulsification technology. The particle sizes of the emulsion are significantly smaller than those of emulsions made using traditional production methods. The dry film is hard, yet still tough and flexible, ensuring durability during the expansion and contraction of wood, stone, and mineral substrates. The film is UV resistant and does not yellow over the years. It is completely insoluble in water and resistant to hydrolysis. The dry film is completely transparent and non-sticky. It has good adhesion even on old alkyd binders.
ARES 33 is a pure acrylic dispersion made using the latest emulsification technology. The particle sizes of the emulsion are significantly smaller than those of emulsions produced by traditional manufacturing methods. The dry film is hard, yet still tough and flexible, ensuring durability during the expansion and contraction of wood, stone, and mineral substrates. The film is UV resistant and does not yellow over the years. It is completely insoluble in water and resistant to hydrolysis. The dry film is completely transparent and non-tacky. It has good adhesion even on old alkyd binders.
