Naziv vsebine
SOLARIS ANTIFRIZ blue, based on glycols and corrosion inhibitors, is suitable for use in cooling, heating and air conditioning systems, food freezing, solar collectors, heat pumps, biogas plants, and more.
agent for solidifying loose gravel, sand, wood chips, bark, and similar decorative materials in bulk.
When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.
Oil for kitchen countertops, tables, and other load-bearing interior surfaces.
PVA BLUE Release agent 500 ml
PVA release agent is based on water soluble polymers. Suitable for releasing polyesther, epoxy, polyurethane and other resins. PVA is silicone and wax free and doesn't leave any marks on the objects.
Tax rate
22 %
Price with VAT:
14,64 €
PVA BLUE RELEASE AGENT
Used for releasing polyesther, epoxy, polyurethane and other resins. PVA is silicone and wax free and doesn't leave any marks on the objects.
Its colour is designed for easier control of the application.
PVA is usually used in combination with V-1 or V-5 release agents.
USAGE
Apply thorough thin coating over entire surface of model or mold.
• Allow surface solvents to evaporate for 5 minutes.
• Compressed air or hair dryer may be used to blow off any excess that has pooled.
• Repeat application and allow to dry.
• You are now ready to apply mold rubber or cast into a cured rubber mold.
Related products
V-1 is a pasty release agent used for releasing composites, epoxy, polyurethane, polyesther, phenolic resins. Works best on smooth surfaces.
Price with VAT:
14,88 €
Release Agent V-5 is a liquid separating / releasing agent intended for the production of composites, castings from epoxy, polyurethane, polyester, phenolic, and other resins.
Price with VAT:
13,24 €
V-1 is a pasty release agent used for releasing composites, epoxy, polyurethane, polyesther, phenolic resins. Works best on smooth surfaces.
Price with VAT:
9,33 €
PVA release agent is based on water soluble polymers. Suitable for releasing polyesther, epoxy, polyurethane and other resins. PVA is silicone and wax free and doesn't leave any marks on the objects.
Price with VAT:
26,84 €
The separator in paste form is used for hard molds/models made of epoxy resins, aluminum, polyurethane, polyester...)
Price with VAT:
22,75 €
