Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.
It is used as a casting material in electronics (can be easily removed once hardened), for casting objects. It is also used for broken glass or ice in theatre.
Hardness
20 Shore A
Pot life
at 20˚C: 30 minutes
Tensile - shear strength
1.0 N/mm²
Curing time, demolding
12 hours
Elongation at break
150 %
Shrinkage
0.7 %
WARNING
H315 Causes skin irritation.
H319 Causes severe eye irritation.
H371 May cause damage to organs.
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read the label before use.
P260 Do not inhale dust/smoke/gas/mist/vapors/aerosols.
P305 + P351 + P338 IN CASE OF CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332 + P313 If skin irritation occurs: seek medical advice/attention.
P405 Keep locked up.
P501 Dispose of contents/container in accordance with regulations.
ECOSIL GEL is a fast-curing silicone rubber with a hardness of 20 Shore A. It is used for making soft molds and for producing orthopedic insoles. Due to its higher viscosity, it is suitable for application on vertical surfaces.
Very durable and tough silicone, suitable for making concrete products (alkali resistant). It can be thickened into a dense paste with the addition of the additive TIXO (0.5 - 1%).
Pourable, addition (platinum) curing, two-component silicone rubber that vulcanizes at room temperature
Very suitable for casting of all common reproduction materials, especially casting resins where absolutely accurate copies of models with pronounced undercuts.
