Naziv vsebine

When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.
natural high-gloss friction polish
Beewood is a natural wax based wood balm. It enhances the natural woodstructure, is easy to apply and provides simple maintenace.
3D-POX is a two-component, solvent-free, kneadable epoxy. It is moldable, carvable, strong, and exhibits excellent adhesion to a variety of substrates. It is easily sanded and will accept paint, screws and nails.
Silicone rubber K31 5 kg   Catalyst C-88 150 g

Silicone rubber K31 5 kg + Catalyst C-88 150 g

White general-purpose mold-making material suitable for casting resins, wax, gypsum, etc. Especially suitable for making specifically coloured molds.
Tax rate
22 %
Price with VAT:
113,46 €
ADD TO CART

K-31 SILICONE RUBBER + CATALYST C-88

 

K-31 is a general-purpose mold-making material suitable for casting resins, wax, gypsum, etc. K-31 is preferred when colour of the mold is important. Its white colour is ideal for pigmentation to all shades.

 

K-31 cures with 3-5 % of either CATALYST C-88 or CATALYST TIXO QUICK. Curing time for C-88 is 8-12 hours and 2-4 hours with TIXO QUICK. Final hardness is achieved after 24 hours with both catalysts.

 

Catalyst TIXO QUICK speeds up the curing time and is mostly used for vertical application without fine details.

Larger quantities of the catalyst speed up the curing time but render the rubber less flexible and softer.

 

ADVANTAGES

-white colour 

-minimal shrinkage

-finest details reproduction

-flexible and high tear-strength

-high temperature an chemical resistance, max. temperature is 200°C

 

Thickening K-31 by adding TIXO thickener -  for vertical molds (brush-on application)

Add 0,5-1% ofTixo quickener after adding the catalyst. The rubber will thicken in 20 - 30 seconds. Tixo thickener does not have an effect on the curing time of the silicone rubber. 

 

Vertical molds can also be made from K-31and catalyst TIXO QUICK.

Apply it in several layers. Each application should be thin and wait for 1-2 hours before applying the next layer.

Related products

    Spray-on Silicone rubber QUICKSIL  750 g + 750 g
    Fast curing spray-on silicone rubber.
    Price with VAT:
    47,58 €
    ELASTOSIL E 41 TANSPARENT 90 ml
    ELASTOSIL® E41 TRANSPARENT is a flowable, one-component silicone rubber with excellent mechanical properties, which cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties, has good adhesion properties to many substrates, in particular on cured silicone rubber
    Price with VAT:
    20,42 €
    ELASTOSIL E 43 90 ml
    ELASTOSIL® E43 TRANSPARENT is a self levelling, one-component acetoxy-cure silicone rubber which cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties, has good adhesion properties to many substrates. In particular used as adhesive on cured silicone rubber
    Price with VAT:
    20,42 €
    KAMSIL CM 30    1000 g + 100 g
    Pourable, addition (platinum) curing, two-component silicone rubber that vulcanizes at room temperature Very suitable for casting of all common reproduction materials, especially casting resins where absolutely accurate copies of models with pronounced undercuts.
    Price with VAT:
    39,77 €
    Cookie - Analitics
    They are used to record the website's obscurity analysis and provide us with data to provide a better user experience.
    Cookie - social
    Cookies required for plug-ins for sharing content from social media sites.
    Cookie - chat
    Cookies allow you to sign up, contact and communicate through the communication plug-in on the page.
    Cookie - marketing
    They target targeted advertising based on past user's activity on other sites.
    What are cookies?
    By visiting and using the site, you consent to the use and recording of cookies.OK Learn more about cookies