Naziv vsebine
agent for solidifying loose gravel, sand, wood chips, bark, and similar decorative materials in bulk.
Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.
When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.
VIVAFORM V2 Skin safe molding material 500 g
Skin safe elastic molding material used for lifecasting / bodycasting. VIVAFORM stays elastic for 24 hours or 2-3 days in an air-tight plastic bag.
Tax rate
22 %
Price with VAT:
12,20 €
VIVAFORM
Thoroughly mix VIVAFORM V2 with water. Mix for at least 30 seconds. Apply to vaseline coated skin.
VIVAFORM V2 stays elastic for 24 hours or 2-3 days in an air-tight plastic bag.
Mixing ratio:
Vivaform V2: 19,3 g
Water: 46 g
Related products
Natural rubber latex for very flexible moulds. Used for casting wax, gypsum, resins...
Price with VAT:
15,98 €
White general-purpose mold-making material suitable for casting resins, wax, gypsum, etc. Especially suitable for making specifically coloured molds.
Price with VAT:
113,46 €
Extremely soft, low-viscosity, high tear strength silicone gel.
Price with VAT:
68,32 €
ECOSIL GEL is a fast-curing silicone rubber with a hardness of 20 Shore A. It is used for making soft molds and for producing orthopedic insoles. Due to its higher viscosity, it is suitable for application on vertical surfaces.
Price with VAT:
32,94 €
Pourable, addition (platinum) curing, two-component silicone rubber that vulcanizes at room temperature
Very suitable for casting of all common reproduction materials, especially casting resins where absolutely accurate copies of models with pronounced undercuts.
Price with VAT:
39,77 €
