Naziv vsebine
agent for solidifying loose gravel, sand, wood chips, bark, and similar decorative materials in bulk.
Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.
When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.
Oil for kitchen countertops, tables, and other load-bearing interior surfaces.
GLASS INVEST for pouring glass 1 kg
Ceramic material used for pouring glass objects.
Tax rate
22 %
Price with VAT:
5,86 €
ADVANTAGES
- smooth cast walls
- fast curing
- simple demolding
USAGE
- powder and water temperature 18-22°C
- water temperature over 30-35°C shortens the curing time, lower temperatures elongate it
- mixing ratio may variate within the prescribed ratio according to the shape's complexity
- pour the powder in the water, stir thoroughly, taking care not to mix in too much air (air bubbles may form
- vacuum the mixture if possible
- cure at room temperature for at least 120 minutes before heating
- evaporate the wax – heat for at least 3 hours
- fill the cuvette with glass granules and heat up to 900°C
- waiting time at 200°C is a few hours
- heating time at end temperature is 20-40 hours
- cooling time is approx. 4 days
- demold after cooling to room temperature
Related products
Crystalflex platinum is a transparent silicone rubber. It is used as a casting material in electronics (in case of repairs, it can be easily removed when cured), for casting various objects (e.g., exhibition, display, or museum exhibits). Crystal flex platinum is used in theater and film for effects of shattered glass or ice.
Price with VAT:
28,55 €
Elastosil M 4470 is used in the production of molds for casting materials with a melting point up to 300 degrees C (e.g., lead and low melting alloys). It cures with the addition of 3% catalyst T 40.
Price with VAT:
40,69 €
Thickener used for silicone rubbers Modrin MF and silicone rubber K-31
Price with VAT:
21,96 €
ECOSIL GEL is a fast-curing silicone rubber with a hardness of 20 Shore A. It is used for making soft molds and for producing orthopedic insoles. Due to its higher viscosity, it is suitable for application on vertical surfaces.
Price with VAT:
32,94 €
Chocosil is a food contact approved silicone rubber used for making chocolate, pralines, marzipan and other confectioners' and baking molds.
Price with VAT:
39,04 €
