EPOXY RESINS

AQUARES is a food-contact approved ultra clear fast curing epoxy resin. This epoxy resin has added UV stabilizers and it is used for coating resin art, mosaics, photographs, tabletops and more.

Transparent two-component polymer resin used for making glass-like clear casts.

High strength polymer resin for restoration/conservation of wood and for production of attractive wood-plastic composites.

Transparent, low viscosity casting epoxy resin.

Clear epoxy resin for coatings from 0,2 - 3 mm.

Fastseal is a fast setting resin with a very short pot life. Used for sealing wood prior to casting with Crystalres.

AQUARES is a food-contact approved ultra clear fast curing epoxy resin. This epoxy resin has added UV stabilizers and it is used for coating resin art, mosaics, photographs, tabletops and more.

High performance general purpose epoxy laminating resin used in wet-lay or vacuum bagging glass fibre, Kevlar / aramid or carbon fibre laminations.

Transparent casting resin for up to 12 cm.

A two-component polymer paste used as a reinforcing layer on EPS, XPS, (Styropor® Styrodur®), PU foams, wood, textile, metal, plastic (except PE, PP and PTFE). Used for making car, aviation and boat prototypes, museum replicas, molds, special effects objects…

Transparent two-component polymer resin used for making glass-like clear casts.

High strength polymer resin for restoration/conservation of wood and for production of attractive wood-plastic composites.

Transparent, low viscosity casting epoxy resin.

Transparent casting resin for up to 12 cm.

AQUARES is a food-contact approved ultra clear fast curing epoxy resin. This epoxy resin has added UV stabilizers and it is used for coating resin art, mosaics, photographs, tabletops and more. This epoxy resin has added UV stabilizers and it is used for coating resin art, mosaics, photographs, tabletops and more.

Transparent two-component polymer resin used for making glass-like clear casts.

Standard size 1 mm, other sizes available upon request.

Used for metallic effects with polyurethane, epoxy, polyester resins, artists' colours, wall colours, acrylic mediums....

Pearlescent powdered pigments used with all kinds of resins.

A two-component polymer paste used as a reinforcing layer on EPS, XPS, (Styropor® Styrodur®), PU foams, wood, textile, metal, plastic (except PE, PP and PTFE). Used for making car, aviation and boat prototypes, museum replicas, molds, special effects objects…

Clear epoxy resin for coatings from 0,2 - 3 mm.

AQUARES is a food-contact approved ultra clear fast curing epoxy resin. This epoxy resin has added UV stabilizers and it is used for coating resin art, mosaics, photographs, tabletops and more. This epoxy resin has added UV stabilizers and it is used for coating resin art, mosaics, photographs, tabletops and more.

Fastseal is a fast setting resin with a very short pot life. Used for sealing wood prior to casting with Crystalres.

Standard size 1 mm, other sizes available upon request.

Standard size 1 mm, other sizes available upon request.

Standard size 1 mm, other sizes available upon request.

Standard size 1 mm, other sizes available upon request.

Standard size 1 mm, other sizes available upon request.

Standard size 1 mm, other sizes available upon request.

Standard size 1 mm, other sizes available upon request.

Standard size 1 mm, other sizes available upon request.

Standard size 1 mm, other sizes available upon request.

Standard size 1 mm, other sizes available upon request.

Standard size 1 mm, other sizes available upon request.

Standard size 1 mm, other sizes available upon request.

Standard size 1 mm, other sizes available upon request.

Transparent two-component polymer resin used for making glass-like clear casts.

High strength polymer resin for restoration/conservation of wood and for production of attractive wood-plastic composites.

Used for metallic effects with polyurethane, epoxy, polyester resins, artists' colours, wall colours, acrylic mediums....

Used for metallic effects with polyurethane, epoxy, polyester resins, artists' colours, wall colours, acrylic mediums....

Used for metallic effects with polyurethane, epoxy, polyester resins, artists' colours, wall colours, acrylic mediums....

Used for metallic effects with polyurethane, epoxy, polyester resins, artists' colours, wall colours, acrylic mediums....

3D-POX is a two-component, solvent-free, kneadable epoxy. It is moldable, carvable, strong, and exhibits excellent adhesion to a variety of substrates. It is easily sanded and will accept paint, screws and nails.

Transparent, low viscosity casting epoxy resin.

High performance general purpose epoxy laminating resin used in wet-lay or vacuum bagging glass fibre, Kevlar / aramid or carbon fibre laminations.

Luminescent / glow in the dark pigments

Luminescent / glow in the dark pigments

Daylight fluorescent powdered pigments

Daylight fluorescent powdered pigments

Daylight fluorescent powdered pigments

Daylight fluorescent powdered pigments

Daylight fluorescent powdered pigments

Daylight fluorescent powdered pigments

Daylight fluorescent powdered pigments

FLIP FLOP pigments are unique, multi‐-layer pigment flakes that give paints, coatings, plastics, textiles and packaging the ability to change color when viewed from different angles.

FLIP FLOP pigments are unique, multi‐-layer pigment flakes that give paints, coatings, plastics, textiles and packaging the ability to change color when viewed from different angles.

FLIP FLOP pigments are unique, multi‐-layer pigment flakes that give paints, coatings, plastics, textiles and packaging the ability to change color when viewed from different angles.

FLIP FLOP pigments are unique, multi‐-layer pigment flakes that give paints, coatings, plastics, textiles and packaging the ability to change color when viewed from different angles.

FLIP FLOP pigments are unique, multi‐-layer pigment flakes that give paints, coatings, plastics, textiles and packaging the ability to change color when viewed from different angles.

FLIP FLOP pigments are unique, multi‐-layer pigment flakes that give paints, coatings, plastics, textiles and packaging the ability to change color when viewed from different angles.

FLIP FLOP pigments are unique, multi‐-layer pigment flakes that give paints, coatings, plastics, textiles and packaging the ability to change color when viewed from different angles.

Daylight fluorescent powdered pigments

Daylight fluorescent powdered pigments

Used for metallic effects with polyurethane, epoxy, polyester resins, artists' colours, wall colours, acrylic mediums....

Pearlescent powdered pigments used with all kinds of resins.

Pearlescent powdered pigments used with all kinds of resins.

Pearlescent powdered pigments used with all kinds of resins.

Pearlescent powdered pigments used with all kinds of resins.

Pearlescent powdered pigments used with all kinds of resins.

Pearlescent powdered pigments used with all kinds of resins.

Pearlescent powdered pigments used with all kinds of resins.

Pearlescent powdered pigments used with all kinds of resins.

Pearlescent powdered pigments used with all kinds of resins.

Pearlescent powdered pigments used with all kinds of resins.

Pearlescent powdered pigments used with all kinds of resins.

Pearlescent powdered pigments used with all kinds of resins.

Pearlescent powdered pigments used with all kinds of resins.

Pearlescent powdered pigments used with all kinds of resins.

Luminescent / glow in the dark pigments

Pearlescent powdered pigments used with all kinds of resins.

Pearlescent powdered pigments used with all kinds of resins.

Pearlescent powdered pigments used with all kinds of resins.

Pearlescent powdered pigments used with all kinds of resins.

Pearlescent powdered pigments used with all kinds of resins.

Pearlescent powdered pigments used with all kinds of resins.

Luminescent / glow in the dark pigments

Luminescent / glow in the dark pigments

AQUARES i is a food-contact approved ultra clear fast curing epoxy resin. This epoxy resin has added UV stabilizers and it is used for coating resin art, mosaics, photographs, tabletops and more.

Fastseal is a fast setting resin with a very short pot life. Used for sealing wood prior to casting with Crystalres.

Transparent two-component polymer resin used for making glass-like clear casts.

Luminescent / glow in the dark pigments

Used for metallic effects with polyurethane, epoxy, polyester resins, artists' colours, wall colours, acrylic mediums....

High strength polymer resin for restoration/conservation of wood and for production of attractive wood-plastic composites.

Transparent, low viscosity casting epoxy resin.

Luminescent / glow in the dark pigments

Used for metallic effects with polyurethane, epoxy, polyester resins, artists' colours, wall colours, acrylic mediums....

Polishing paste for epoxy resins.

Luskovit colourflakes are sprinkled into a primer, in full or partial covering, for decoration purposes. The materials in which the flakes are processed are water-borne and solvent-based epoxies, polyurethane systems and acrylate. Easy to sprinkle and sand and lighter in weight than alternative particles. Decorative blends can be formed by mixing a variety of solid colors.

Luskovit colourflakes are sprinkled into a primer, in full or partial covering, for decoration purposes. The materials in which the flakes are processed are water-borne and solvent-based epoxies, polyurethane systems and acrylate. Easy to sprinkle and sand and lighter in weight than alternative particles. Decorative blends can be formed by mixing a variety of solid colors.

Luskovit colourflakes are sprinkled into a primer, in full or partial covering, for decoration purposes. The materials in which the flakes are processed are water-borne and solvent-based epoxies, polyurethane systems and acrylate. Easy to sprinkle and sand and lighter in weight than alternative particles. Decorative blends can be formed by mixing a variety of solid colors.

Luskovit colourflakes are sprinkled into a primer, in full or partial covering, for decoration purposes. The materials in which the flakes are processed are water-borne and solvent-based epoxies, polyurethane systems and acrylate. Easy to sprinkle and sand and lighter in weight than alternative particles. Decorative blends can be formed by mixing a variety of solid colors.

Luskovit colourflakes are sprinkled into a primer, in full or partial covering, for decoration purposes. The materials in which the flakes are processed are water-borne and solvent-based epoxies, polyurethane systems and acrylate. Easy to sprinkle and sand and lighter in weight than alternative particles. Decorative blends can be formed by mixing a variety of solid colors.

Luskovit colourflakes are sprinkled into a primer, in full or partial covering, for decoration purposes. The materials in which the flakes are processed are water-borne and solvent-based epoxies, polyurethane systems and acrylate. Easy to sprinkle and sand and lighter in weight than alternative particles. Decorative blends can be formed by mixing a variety of solid colors.

Luskovit colourflakes are sprinkled into a primer, in full or partial covering, for decoration purposes. The materials in which the flakes are processed are water-borne and solvent-based epoxies, polyurethane systems and acrylate. Easy to sprinkle and sand and lighter in weight than alternative particles. Decorative blends can be formed by mixing a variety of solid colors.

Luskovit colourflakes are sprinkled into a primer, in full or partial covering, for decoration purposes. The materials in which the flakes are processed are water-borne and solvent-based epoxies, polyurethane systems and acrylate. Easy to sprinkle and sand and lighter in weight than alternative particles. Decorative blends can be formed by mixing a variety of solid colors.

Luskovit colourflakes are sprinkled into a primer, in full or partial covering, for decoration purposes. The materials in which the flakes are processed are water-borne and solvent-based epoxies, polyurethane systems and acrylate. Easy to sprinkle and sand and lighter in weight than alternative particles. Decorative blends can be formed by mixing a variety of solid colors.

Luskovit colourflakes are sprinkled into a primer, in full or partial covering, for decoration purposes. The materials in which the flakes are processed are water-borne and solvent-based epoxies, polyurethane systems and acrylate. Easy to sprinkle and sand and lighter in weight than alternative particles. Decorative blends can be formed by mixing a variety of solid colors.

Luskovit colourflakes are sprinkled into a primer, in full or partial covering, for decoration purposes. The materials in which the flakes are processed are water-borne and solvent-based epoxies, polyurethane systems and acrylate. Easy to sprinkle and sand and lighter in weight than alternative particles. Decorative blends can be formed by mixing a variety of solid colors.

Luskovit colourflakes are sprinkled into a primer, in full or partial covering, for decoration purposes. The materials in which the flakes are processed are water-borne and solvent-based epoxies, polyurethane systems and acrylate. Easy to sprinkle and sand and lighter in weight than alternative particles. Decorative blends can be formed by mixing a variety of solid colors.

Luskovit colourflakes are sprinkled into a primer, in full or partial covering, for decoration purposes. The materials in which the flakes are processed are water-borne and solvent-based epoxies, polyurethane systems and acrylate. Easy to sprinkle and sand and lighter in weight than alternative particles. Decorative blends can be formed by mixing a variety of solid colors.

Luskovit colourflakes are sprinkled into a primer, in full or partial covering, for decoration purposes. The materials in which the flakes are processed are water-borne and solvent-based epoxies, polyurethane systems and acrylate. Easy to sprinkle and sand and lighter in weight than alternative particles. Decorative blends can be formed by mixing a variety of solid colors.

Luskovit colourflakes are sprinkled into a primer, in full or partial covering, for decoration purposes. The materials in which the flakes are processed are water-borne and solvent-based epoxies, polyurethane systems and acrylate. Easy to sprinkle and sand and lighter in weight than alternative particles. Decorative blends can be formed by mixing a variety of solid colors.

Luskovit colourflakes are sprinkled into a primer, in full or partial covering, for decoration purposes. The materials in which the flakes are processed are water-borne and solvent-based epoxies, polyurethane systems and acrylate. Easy to sprinkle and sand and lighter in weight than alternative particles. Decorative blends can be formed by mixing a variety of solid colors.

Luskovit colourflakes are sprinkled into a primer, in full or partial covering, for decoration purposes. The materials in which the flakes are processed are water-borne and solvent-based epoxies, polyurethane systems and acrylate. Easy to sprinkle and sand and lighter in weight than alternative particles. Decorative blends can be formed by mixing a variety of solid colors.

Luskovit colourflakes are sprinkled into a primer, in full or partial covering, for decoration purposes. The materials in which the flakes are processed are water-borne and solvent-based epoxies, polyurethane systems and acrylate. Easy to sprinkle and sand and lighter in weight than alternative particles. Decorative blends can be formed by mixing a variety of solid colors.

Luskovit colourflakes are sprinkled into a primer, in full or partial covering, for decoration purposes. The materials in which the flakes are processed are water-borne and solvent-based epoxies, polyurethane systems and acrylate. Easy to sprinkle and sand and lighter in weight than alternative particles. Decorative blends can be formed by mixing a variety of solid colors.

Luskovit colourflakes are sprinkled into a primer, in full or partial covering, for decoration purposes. The materials in which the flakes are processed are water-borne and solvent-based epoxies, polyurethane systems and acrylate. Easy to sprinkle and sand and lighter in weight than alternative particles. Decorative blends can be formed by mixing a variety of solid colors.

Luskovit colourflakes are sprinkled into a primer, in full or partial covering, for decoration purposes. The materials in which the flakes are processed are water-borne and solvent-based epoxies, polyurethane systems and acrylate. Easy to sprinkle and sand and lighter in weight than alternative particles. Decorative blends can be formed by mixing a variety of solid colors.

UV-LUX powder pigments glow under the 365 nm black light.

UV-LUX powder pigments glow under the 365 nm black light.

UV-LUX powder pigments glow under the 365 nm black light.

UV-LUX powder pigments glow under the 365 nm black light.

UV-LUX powder pigments glow under the 365 nm black light.

UV-LUX powder pigments glow under the 365 nm black light.

Standard size 1 mm, other sizes available upon request.

Standard size 1 mm, other sizes available upon request.

Standard size 1 mm, other sizes available upon request.

Standard size 1 mm, other sizes available upon request.

Standard size 1 mm, other sizes available upon request.