mold making materials

Electric heated spatula for shaping of thermoplastics materials with exchangeable shapes (above 20 differences shapes available - 2 are included), with digital measurement and regulation of temperature. Thermo operated crucibles for melting waxes and resins. Micro hot air blowers.

AQUARES is a food-contact approved ultra clear fast curing epoxy resin. This epoxy resin has added UV stabilizers and it is used for coating resin art, mosaics, photographs, tabletops and more.

VACUSEAL WOOD Stabilizing Resin is a heat cured resin used for stabilizing and hardening wood and all other porous materials.Use KOLORO P dyes to color VACUSEAL.

High strength PUR elastomer; Shore A hardness: 45 Pot life: 10 min Demoulding time: 2 hours

MODRIN is a general-purpose mold-making material suitable for casting resins, wax, gypsum, etc. MODRIN is preferred when undercuts are involved and a certain inherent stability of the mold is required.

Transparent two-component polymer resin used for making glass-like clear casts.

High strength polymer resin for restoration/conservation of wood and for production of attractive wood-plastic composites.

Transparent, low viscosity casting epoxy resin.

Silicone rubber used for lifecasting / bodycasting.

Very fast curing, translucent silicone rubber. Suitable for casting very accurate copies with undercuts.

EPOLIV 5000 is a self-levelling polymer flooring material. Standard neutral white color (RAL 9003 ; signal white) used mainly for concrete floors.

E paste is used for production of seamless models, contour shaped machinable blanks, mockups, composite toolings; good adhesion on expanded polystyrene and wood; good behavior on vertical supports up to 25 mm . Epaste

Light weight liquid polymer foam which hardens into a rigid foam in a few minutes with an exothermic reaction.

Liquid polymeric foam that hardens into a very rigid foam in a few minutes with an exothermic reaction.

Clear epoxy resin for coatings from 0,2 - 3 mm.

STABILIT UV s a one-component, non-yellowing, transparent aliphatic polyurethane binder. It can be mixed with marble, natural stone or quartz to make floorings for internal and external surroundings.

Two-component polyurethane which cures after 5-6 minutes into a very hard but tough material. Appropriate for manual or machine use.

Fastseal is a fast setting resin with a very short pot life. Used for sealing wood prior to casting with Crystalres.

AQUARES is a food-contact approved ultra clear fast curing epoxy resin. This epoxy resin has added UV stabilizers and it is used for coating resin art, mosaics, photographs, tabletops and more.

High performance general purpose epoxy laminating resin used in wet-lay or vacuum bagging glass fibre, Kevlar / aramid or carbon fibre laminations.

Transparent casting resin for up to 12 cm.

Fast curing two-component urethane, used for casting precise model parts, prototypes, tooling boards, casting in electronics; also used as an adhesive..

A two-component polymer paste used as a reinforcing layer on EPS, XPS, (Styropor® Styrodur®), PU foams, wood, textile, metal, plastic (except PE, PP and PTFE). Used for making car, aviation and boat prototypes, museum replicas, molds, special effects objects…

WAX DYES Cera Lux are dye and pigment preparations for all types of waxes for different applications: encaustic, investment waxes, candles, shoe and wood waxes etc. The composition of CERA LUX ensures fast and easy mixing.

Stabilit is a one-component polyurethane resin specially designed to use as a binder of crushed natural stone aggregates. The result is a smooth, attractive and contemporary floor. It is draining, free of joints and requires low maintenance. It is ideal for the creation of tree basins, to decorate interior and exterior floors, to decorate gardens, pedestrian areas and trails, etc. Its use is recommended only with the clean and dry stones

FX SIL GEL is used for making prop organs, fatty tissues and flesh. It melts at a low temperature and can be easily cut. It can be painted with powder pigments VIVAT and EFFECT.

Aramid fabric used for sewing.

Transparent two-component polymer resin used for making glass-like clear casts.

High strength polymer resin for restoration/conservation of wood and for production of attractive wood-plastic composites.

Liquid polymeric foam that hardens into a very rigid foam in a few minutes with an exothermic reaction.

Pure Chinese Tung Oil is easy to work with and maintain, it is extremely versatile and can be used on almost any wooden surface, including interior and exterior furniture, hardwood floors, skirting boards, gates, children’s play areas, kitchen worktops, musical instruments and food preparation areas etc.

Rustikal is a coating made on the basis of renewable natural plant materials. It does not contain biocides and can be used in all living areas. It is used for coating wooden furniture, hardwood floors, parquet and other wooden surfaces.

Transparent, low viscosity casting epoxy resin.

AQUAPOX is a coating used on wet and humid surfaces.

Shell gold is powder gold with gum. Packed in small plastic tins. It is watersoluble and is to be applied as water colours.

Fast curing two-component urethane, used for casting precise model parts, prototypes, tooling boards, casting in electronics; also used as an adhesive..

Canadian turpentine. Canadian turpentine from the balsam fir, a long-leaved pine.

Liquid polymeric foam that hardens into a very rigid foam in a few minutes with an exothermic reaction.

Light weight liquid polymer foam which hardens into a rigid foam in a few minutes with an exothermic reaction. Its expansion rate is 15 x.

Clear epoxy resin for coatings from 0,2 - 3 mm.

Rigid polymer foam with expansion rate 2.5 x.

Transparent casting resin for up to 12 cm.

AQUARES is a food-contact approved ultra clear fast curing epoxy resin. This epoxy resin has added UV stabilizers and it is used for coating resin art, mosaics, photographs, tabletops and more. This epoxy resin has added UV stabilizers and it is used for coating resin art, mosaics, photographs, tabletops and more.

Colloidal nano-particles of lime for stone and plaster consolidation

Two-component polyurethane which cures after 5-6 minutes into a very hard but tough material. Appropriate for manual or machine use.

Stabilit is a one-component polyurethane resin specially designed to use as a binder of crushed natural stone aggregates. The result is a smooth, attractive and contemporary floor. It is draining, free of joints and requires low maintenance. It is ideal for the creation of tree basins, to decorate interior and exterior floors, to decorate gardens, pedestrian areas and trails, etc. Its use is recommended only with the clean and dry stones

Transparent two-component polymer resin used for making glass-like clear casts.

A vinyl-acrylic binder, used for interior paints and coatings. It has a ver good adhesion to mineral and wooden substrates. Can be used as an adhesive for paper, textile, wood.

Pure Chinese Tung Oil is easy to work with and maintain, it is extremely versatile and can be used on almost any wooden surface, including interior and exterior furniture, hardwood floors, skirting boards, gates, children’s play areas, kitchen worktops, musical instruments and food preparation areas etc.

Rustikal is a coating made on the basis of renewable natural plant materials. It does not contain biocides and can be used in all living areas. It is used for coating wooden furniture, hardwood floors, parquet and other wooden surfaces.

MODRIN is a general-purpose mold-making material suitable for casting resins, wax, gypsum, etc. MODRIN is preferred when undercuts are involved and a certain inherent stability of the mold is required.

VACUSEAL WOOD Stabilizing Resin is a heat cured resin used for stabilizing and hardening wood and all other porous materials. Use KOLORO P dyes to color VACUSEAL.

White general-purpose mold-making material suitable for casting resins, wax, gypsum, etc. Especially suitable for making specifically coloured molds.

White general-purpose mold-making material suitable for casting resins, wax, gypsum, etc. Especially suitable for making specifically coloured molds.

Kremenit is a skin safe ceramic powder which hardens into a porcelain-like material with the addition of water. It cures at room temperature, burning is not necessary.

A specially formulated paste to be used on all food-contact wooden items. Great for cutting boards, salad bowls, wood utensils, and serving trays. Ingredients: natural oils and waxes

Gold lustre. Firing temperature: 780-820°C.

Shell gold is powder gold with gum. Packed in small plastic tins. It is watersoluble and is to be applied as water colours.

Kremenit is a skin safe ceramic powder which hardens into a porcelain-like material with the addition of water. It cures at room temperature, burning is not necessary.

Natural hard-drying oil used for coating terracotta floor tiles, bricks, clay objects, stone and other mineral surfaces. Teranol makes a silky film on the surface.

STONIT is a high-quality inorganic casting material, suitable for the production of weather-resistant products similar to natural stone. It can be pigmented with inorganic alkali resistant pigments.

Concrete-like hi-tech modified mineral casting material

It is a high-quality inorganic modelling /restoring mass, suitable for the production of weather-resistant products similar to natural stone.